19 replies to this topic

[Slater]

SLATERSWORLD.COM ( police memorabilia collectors)

Good afternoon, My name is Richard Clay ( AIM Slater ). I specialise in buying, selling and trading British and Foreign Police memorabilia and Insignia all over the world. I have been selling on Ebay for past four years. Please see my Ebay shops as listed below to check on my integrity and feedback which is 100% . I am also a member of the police memorabilia collectors club uk (PMCC). Please visit website at www.police-memorabilia.co.uk . I have an advert on the home page SLATERSWORLD.COM. I am enquiring whether you would like to purchase such items for your business or as an individual collector. I can supply items in bulk purchase or as an individual sale. I have Police badges/insignia, Buttons,Helmets,Caps, Helmets with badges and without, old decommissioned uniform,books, insignia anything police related,lapel pins,truncheons,medals,models,china ornaments,photos,anything police memorabilia related including many international items. All 100% genuine at low prices.

If you are interested please give me a call on 07717763718 or email me at r.clay1@btinternet,com


Regards


Richard Clay..


Please also visit my sites below for further details.


http://stores.ebay.co.uk/policehelmetsuk14 ( My Ebay Store )


www.police-memorabilia.co.uk ( British Insignia Site Best in UK )


http://stores.ebay.com/theukbobbystore ( My US Ebay Store )

I ONLY SELL TO GENUINE COLLECTORS ( Please Read Legal Notice on My Website regarding possession and Use of such Items prior to any purchase ).

[TA-TL-TBreak]

I'de be interested if yourself or anyone else has a GPA tie pin on offer, like the one in my avatar?

[pmtts]

I'de be interested if yourself or anyone else has a GPA tie pin on offer, like the one in my avatar?

Ive not seen any on the market either. I'd take one for obvious reasons

Do the GPA sell them?

[TA-TL-TBreak]

They used to sell loads of GPA stuff from pens and folders to the tie pins, they stopped though but were supposed to have got a new load of pins for the AGM they had mid this year. I have emailed them but got no reply, which is no surprise really as their internet site has been under construction for over a year, lol.

I really want a Tie Pin though now, it's getting to be a mission as I must have asked them originally for 1 back in 2007.

Even Ebay hasn't had any old one's, can anyone help?

[17398]

It seems as though there may be enough interested parties to purchase them, in addition to advertising them through the LGBT unit of your respective forces - why not contact tietacs.org to have one made?

[pmtts]

It seems as though there may be enough interested parties to purchase them, in addition to advertising them through the LGBT unit of your respective forces - why not contact tietacs.org to have one made?

We have received a couple enquiries recently regarding a GPA pin which we would be more than pleased to produce. I too emailed the GPA sometime back regarding the idea but have yet to receive a reply.

Edited by pmtts, 14 February 2009 - 05:14 PM.

[TA-TL-TBreak]

A year on since my last post, 2 years since I first emailed the GPA with no reply from a few more I sent...

Does anyone have a GPA tie pin to sell or had any luck getting one, not that it stands for much of an organisation any more however I would still like one and Ebay hasnt thrown any up

[Corbs]

Ring them? People can ignore/forget emails a lot easier than a person on the end of the phone.

[pmtts]

A year on since my last post, 2 years since I first emailed the GPA with no reply from a few more I sent...

Does anyone have a GPA tie pin to sell or had any luck getting one, not that it stands for much of an organisation any more however I would still like one and Ebay hasnt thrown any up

It does supprise me that with a market for these, nobody at the GPA appears to be listening!

[MikeBrum]

Why not send these people an email:
http://www.thepinpeople.com/
get lots made and sell them to fellow GPA members.

[pmtts]

Why not send these people an email:
http://www.thepinpeople.com/
get lots made and sell them to fellow GPA members.

Free: Mold, Shipping, Artwork, Setup, & Shipping

Trust me, It's not free!!

In all my years in this game, I know the sales speil that pin companies give!!

Order 3,000 plus and they might throw something in for free!

Also their prices are very expensive on soft enamel.

As for getting lots made and selling them to GPA members, you would want to make sure you have permission from the GPA first! Ive known individuals to get into all sorts of legal problems doing this off their own backs.

Edited by pmtts, 18 December 2009 - 12:01 PM.

[En Garde]

Does anyone know where I can get me mits on a GPA tie pin then?

[pmtts]

Does anyone know where I can get me mits on a GPA tie pin then?

They appear to be much sought after. The GPA need to pull their finger out and start to market them on their website that has been under construction for god knows how long!

Saying that, I've seen the odd one appear on Ebay.

[En Garde]

I'm always looking on ebay without success!

[Damsel]

pmtts

What are the chances (and legalities) of you producing your own (unsanctioned, as they can't be bothered to reply) GPA pin?

Something using the same colours and a similar design, but with something like "GPA Member" on it, or something, I dunno, you'd have more idea than me.


Idea ©2010 Damsel, who'll want at least 2 free pins if you do it

[pmtts]

pmtts

What are the chances (and legalities) of you producing your own (unsanctioned, as they can't be bothered to reply) GPA pin?

Something using the same colours and a similar design, but with something like "GPA Member" on it, or something, I dunno, you'd have more idea than me.


Idea ©2010 Damsel, who'll want at least 2 free pins if you do it

Personally I wouldn't copy their logo with out their permission, highly unlikely it's copyright as nothing is registered on the IPO database but you never know.

I'd be happy to do another variation of the design but not have ' GPA ' mentioned on it as that is treading on hot water.

If the demand was there, I'd be happy to get something drawn up.

Edited by pmtts, 19 March 2010 - 08:06 PM.

[Damsel]

Personally I wouldn't copy their logo with out their permission, highly unlikely it's copyright as nothing is registered on the IPO database but you never know.

I'd be happy to do another variation of the design but not have ' GPA ' mentioned on it as that is treading on hot water.

If the demand was there, I'd be happy to get something drawn up.

ok, so, so that we're all reading the same page. What would be a minimum production run, and what would be the price per unit? Roughly will do, I'm sure no one is going to hold you to any specific figures at this early a stage

[En Garde]

I'd be keen to get something like that.

[mazza1984]

Hi all,

Please take a look at my listing on ebay...

http://cgi.ebay.co.u...IT#ht_500wt_949

I am selling a miniature boxed figuring that was made by Asset to celebrate the first female chief constable in the UK in Lancashire.

Thank you,

Mary

[cfnbryn]

I'd be keen to get something like that.

As would I!