Sepura radio
Started by
special2011
, May 23 2012 10:11 PM
32 replies to this topic
#26
Posted 26 May 2012 - 06:57 PM
Have you tried as per my suggestion? I'm pretty sure the setting to alter the backlight are as my comment.
#27
Posted 28 May 2012 - 12:45 PM
There's lots of settings but I think they can only be changed with Sepura Radio Manager software. While most people would probably find them really annoying, I'd like the beep at the end of transmission but I can't turn it on through the menu. The folks at the nick just down the road in the next force wish they had the opposite!
#28
Posted 28 May 2012 - 12:49 PM
I have the beep on mine, was annoying at first but got used to it now! Most people do hate it though
I'd just like the time on mine to be honest!
I'd just like the time on mine to be honest!
#29
Posted 28 May 2012 - 12:54 PM
Backlight...
If it's the same as ours. Press the down button, scroll to settings, press down again, scroll to option 2, then press the red button to disable, or the green one to enable.
Settings, option 8 will also set the clock if yours is wrong.
I think it would be fair to say that while some of the things covered in the manual are indeed restricted, basic settings that would be common to all users of Airwave aren't really a problem.
If it's the same as ours. Press the down button, scroll to settings, press down again, scroll to option 2, then press the red button to disable, or the green one to enable.
Settings, option 8 will also set the clock if yours is wrong.
I think it would be fair to say that while some of the things covered in the manual are indeed restricted, basic settings that would be common to all users of Airwave aren't really a problem.
#30
Posted 28 May 2012 - 03:49 PM
It sounds like it's hard coded in the radio as the Standard setting in GMP, only lights up the screen when:
1. You press a button
2. Someone P2P's you
3. The emergency button is pressed by some one.
There is an option in the menu to turn the backlight off though. We also have convert mode as well, but have never tried that. It might be worth giving your radio workshop a call to see if it can be done.
1. You press a button
2. Someone P2P's you
3. The emergency button is pressed by some one.
There is an option in the menu to turn the backlight off though. We also have convert mode as well, but have never tried that. It might be worth giving your radio workshop a call to see if it can be done.
#31
smt
-
- Excluded
-
- 187 posts
Learning the Ropes
Posted 28 May 2012 - 03:55 PM
All you need to do is ask your local superuser. They'll be able to tell you if the force have disabled/restricted the functionality. Simple.
#32
Posted 28 May 2012 - 04:24 PM
All you need to do is ask your local superuser. They'll be able to tell you if the force have disabled/restricted the functionality. Simple.
Or they can just follow the instructions above, try it and find out thus saving the time of a supervisor.....
#33
Posted 28 May 2012 - 06:47 PM
Backlight...
If it's the same as ours. Press the down button, scroll to settings, press down again, scroll to option 2, then press the red button to disable, or the green one to enable.
Settings, option 8 will also set the clock if yours is wrong.
I think it would be fair to say that while some of the things covered in the manual are indeed restricted, basic settings that would be common to all users of Airwave aren't really a problem.
Our radio is the 3800, not the 3900. It looks identical and has the same basic settings as the police one.
0 user(s) are browsing this forum
0 members, 0 guests, 0 anonymous users
